LinkBack URL
About LinkBacksWho makes something?
This getting rocks into my front rims and killing my front rotors at SW is getting old and costly
Rotor protectors from rocks
Who makes something?
This getting rocks into my front rims and killing my front rotors at SW is getting old and costly
2010 Honda CBR1000RR Orange/Silver. New toy
2005 Honda TRX450R .. was fun..
well the stock ones usually work fine but speedworld has some larger than average rocks. maybe someone makes a billet version of the stock ones?
Coon #77
My Sponsors:
Big O Tires
13564 W. Van Buren St. Goodyear, AZ (623) 932-3110
Troy Lee Designs
PRO-ATV
ForstCo
Lonestar Racing
WWW.lsracing.com
Carefree Insurance and Financial Services
Never seen front rotor guards before. You could talk to LSR and see if they could make something for you, or go to Ace Hardware, get a sheet of aluminum, mock up a template and cut some out on your own. As long as you have the stock ones, it should be as easy as tracing and cutting.
Or, just remove the front rotors all together. At least you won't have to worry about a rock getting stuck in there.
SPECIAL THANKS TO
Big O Tires 13564 W. Van Buren St. Goodyear, AZ (623) 932-3110 www.bigotires.com/store.aspx?storeid=4086
LONESTAR RACING 1-800-4LS-RACE www.lsracing.com
Terry Design Concepts www.terrydesignconcepts.com
TROY LEE DESIGNS www.troyleedesigns.com
LAKER CUSTOM www.lakercustom.com
SCOTT USA http://www.scott-sports.com/gb_en/main
Are we talking about:
The plastic inner guard that mounts on the brake caliper and/or the outer metal guard that mounts in between the wheel and the hub?
I have these on all my Yamaha's.
Looks like it would be super easy to fab some out of sheet metal or scrap plastic would probably work better so it returns to it's shape after taking a rock.
08 Raptor 700 GYTR SE - mostly stock
08 Raptor 250 - GYTR Pipe
06 YFZ450 50th SE - Laker Plastics, Hydrodyn +2 Arms, Lonestar Rear End, Big Gun Pipe,
- it's a racer
Posting Permissions
Reply With Quote