LinkBack URL
About LinkBacksDoes anyone know what bend would be needed for a raptor 700. Would they need to be raised because of the tank? Please help me out! Thanks
Flexx bars for 06 raptor 700
Does anyone know what bend would be needed for a raptor 700. Would they need to be raised because of the tank? Please help me out! Thanks
04 YFZ 450 - its pink and it hauls
06 YFZ 450 - its black and faster than the pink one
we run the 14 degree high bars. not the low ones. we also have a +3 stem on there.
My Racing Website: KendallRace.com
09 Baja 500 and 2010 Vegas to Reno, Class Winners
Orange/White 06 Honda 450R
KMS Raptor 700, 71 rwhp, 101mph
Sponsors: KMS Performance, Motowoz Shocks, Lone Star Racing, Fasstco Flexx bars, EVS Sports, Scott Goggles, BRM Off Road Graphics
On my 08 700 I run the Pro Taper Contour bars in the "Raptor Bend" on the stock stem, it's a specific bend that is much taller than any other stock bar. If you ran a custom stem or risers you would probably need 4-5" combined height to be equal in height to the stock bars.
08 Raptor 700 GYTR SE - mostly stock
08 Raptor 250 - GYTR Pipe
06 YFZ450 50th SE - Laker Plastics, Hydrodyn +2 Arms, Lonestar Rear End, Big Gun Pipe,
- it's a racer
i run 14 degree flexx bars w/ a +1 stem, and it doesn't hit the tank. i have orangutan arms lol, but i'll eventually get a taller stem for better comfort.
"i'd give my left arm to be ambidextrous.."
http://quadhub.com/sig/ride_sig_530.png
http://quadhub.com/sig/ride_sig_532.png
http://quadhub.com/sig/ride_sig_531.png
Posting Permissions
Reply With Quote