LinkBack URL
About LinkBacksWe have a Kawasaki KSF 250 mojave quad, no battery but need to hook a kill switch tether to it. Anyone know where to hook it up? I assume one wire will go to a ground but have no idea where to splice it in.
Thanks
Need help installing tether kill
We have a Kawasaki KSF 250 mojave quad, no battery but need to hook a kill switch tether to it. Anyone know where to hook it up? I assume one wire will go to a ground but have no idea where to splice it in.
Thanks
What kinda switch you have. THere is an open and closed styel. I dont know whats what, but my pro armor i have wired to both sides of the coil, one is grounded on one side and the other is in the current flow or something, i am not good at explaining things haha
Mitch 2005 Red TRX450r
startin to come along... 1 piece at a time!!
You need to find out if it is N/C or N/O switch ( normally closed or normally open)
that will matter how it is hooked up. I am not sure if the quad has a TOS(tip over switch) if so.. alot of LTR owners are hooking them up to that.. I have a N/C Pingle switch thats hooked right to the wires for the stock kill switch
2010 Honda CBR1000RR Orange/Silver. New toy
2005 Honda TRX450R .. was fun..
Well then that means that i have an open one
Mitch 2005 Red TRX450r
startin to come along... 1 piece at a time!!
Yes your is more than likley N/O. its grounding out the coil when its pulled.Originally Posted by rinehart_mitch
the Proarmor for our quads is like that when you buy the Install kit for the coil. But a few people have had it pop the coil, but thats with our EFI your carb
2010 Honda CBR1000RR Orange/Silver. New toy
2005 Honda TRX450R .. was fun..
Posting Permissions
Reply With Quote